1 / 3
Reducing rings for die holder 25-->20 mm and 25-->16 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To use 25 mm die holders also with smaller threading dies
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Simple reducing rings to use a 25 mm die threading holder also with some smaller dies (because I am to cheap to buy a suitable one).
Fits 20 mm dies and also small 16 mm dies.
This is a Lux tools die holder but I think they should all be very similar.