HueForge of John Marston - Red Dead Redemption 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A HueForge of John Marston - Red Dead Redemption 2 using 3 colours (Black, Grey, White)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
My son is obsessed with me making him HueForge prints, after doing one of Arthur Morgan that we found on printables, he wanted one of John Marston in the iconic cover photo. This uses only 3 colours, black, grey and white - for the grey I've used Bambu labs Blue/Grey - but you can experiment with others.
This took about 4h:30m to print with colour swaps on my Ender 3V 3SE
(Photos before I cleaned up some of the fine stringing)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x112.5mm in size
#1c1c1c PLA PolyTerra Charcoal Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#e2dedb PLA Panchroma White Transmission Distance: 3.1
Swap Instructions:
Start with Charcoal Black
At layer #14 (1.28mm) swap to Blue Gray
At layer #20 (1.76mm) swap to White for the rest.
