DIY Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it. The assembly video is here https://youtu.be/IyjuDWjKk\_U
You need 4, 40mm or 45mm M3 Screws depending how you assemble it.
120mm Case Fan
https://amzn.to/2SRJS6W
USB Boost Module
https://amzn.to/2FjXpvS
Carbon Filter
https://amzn.to/2Ff4zlc
Follow us on YouTube at https://youtube.com/MakersMashup
Please consider helping support the channel through Patreon
https://www.patreon.com/makersmashup
Follow me on Twitter: https://twitter.com/MakersMashup
Instagram: https://instagram.com/makers\_mashup/
Visit our website www.MakersMashup.com
Print instructions
100% infill will provide a much stronger shroud and save time printing compared to 20% infill.