RFID Tag Wrist Band
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wearable wrist band designed for holding round RFID tags. Print in TPU. Parametric Fusion 360 design!
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Have you ever locked yourself out of the room by leaving your door badge or card inside? It happened to me pretty much daily... until I made myself this simple TPU wristband that holds the RFID tag from my keychain badge. Simple print from TPU, holds via integral printed button latch. Slots in the band reduce need for infill and also prevent sweating.
I recommend printing from TPU (even the more rigid ones are flexible enough) using 4 perimeters, no infill and everything 'concentric' (top, bottom, internal solid layers).
I am sharing parametric Fusion 360 model so you can adapt the band to your wrist size and the size of your RFID tag!
The tag is retained via conical angled walls of the opening but you can always use a bit of adhesive to make sure it doesn't fall out.
