LayersFactory
Zgłoś model
1 / 6
ESP 32 C3 SuperMini Breadboard (STEP) — zdjęcie 1
1 / 6

ESP 32 C3 SuperMini Breadboard (STEP)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

This is a compact mini breadboard holder designed for the ESP32-C3 Supermini, created to make quick prototyping easier and cleaner.

The design allows you to reuse the metal rails from a standard breadboard. Simply remove the rails from a regular breadboard and insert them into the slots of this print. The ESP32-C3 sits on top, giving you accessible prototyping connections in a very small footprint.

The enclosure prints easily without supports and is assembled with a single M3x6mm flat head screw, which holds the top and bottom parts together while securing the rails in place.

Features

  • Designed for ESP32-C3 boards

  • Very compact prototyping platform

  • Uses recycled breadboard rails

  • No supports required for printing

  • Simple two-part design

  • Assembly with 1× M3 6mm flat head screw

Assembly

  1. Remove the metal rails from a standard breadboard.

  2. Insert the rails into the slots in the printed case.

  3. Close the case with the bottom part.

  4. Secure everything using one M3x6mm flat head screw.

  5. Enjoy!

Disclaimer:

If you have some problem with the fitting, it is poassible to edit the step file available.