1 / 3
Carpet Offroad Sidewall Gluing Fixture (2WD Buggy Fronts) — zdjęcie 1
1 / 3

Carpet Offroad Sidewall Gluing Fixture (2WD Buggy Fronts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a fixture for applying sidewall glue to the fronts of 2WD buggies.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Sidewall Gluing Fixture:

  • Modelled after Schumacher Splinter front tires, others like Fuzzbites should work.

Instructions:

  • Apply glue to fixture recess.

  • Put tire face down in fixture.

  • Rotate tire, do not let it sit and dry, spin it around and scrub the glue in.

  • Wipe excess out of fixture and it will last a long time.

  • Experiment with the amount of glue to use.

  • I'm printing these just out of PLA with default settings, treat them as semi-disposable.