Anti-Vibration TPU Mount for Newa Powerhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop-in TPU mount for Newa powerhead. Absorbs vibrations before they hit the glass. 5g, prints in 30 min.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of that annoying buzz from your aquarium pump? The problem isn't the pump — it's the rigid mount transmitting motor vibration straight to the glass, which amplifies it.
This is a drop-in TPU replacement for the stock rigid mount on Newa powerheads. It decouples the pump from the suction cups using flexible spokes, killing vibration transfer to the glass.
How it works:
The stock mount is rigid plastic — vibrations at 50Hz go motor → mount → suction cups → glass → noise. This TPU version absorbs them before they reach the glass. Simple as that.
Specs:
• Material: TPU 95A (don't use harder — it won't dampen enough)
• Print time: ~30 min
• Weight: ~5g
• Tested on: Newa Powerhead (should fit other similar mounts)
• Printer: Prusa Core One
Result:
From noticeable buzz to basically silent. No mods to the pump, fully reversible.
Tips:
• Spoke lengths are intentionally asymmetric (11, 12, 13mm) to avoid resonance in the mount itself
• Print with 100% infill or gyroid — the part needs to be solid, not hollow
• The mount should flex perpendicular to the glass but stay rigid parallel to it