Strawberries 4 color sign for garden (no MMU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strawberry four-color sign for our vegetable raises garden, so you know where you plant your seeds. (Fraises)
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 321
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on this strawberrie svg on Noonprojects, I've made a strawberry sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as four-color.
Straberry_V2.STL /Straberries_0.2mm_PLA_MK3S_1h11m.gcode :
- 1st layer: Green
- 2nd layer: white
- 3rd layer: red
- 4th layer: black
Take the shorter print if you want a “small” sign who is 55mm width. Otherwise the longer in time is 110mm width.
If you take the STL, I would suggest to reduce the width and height, but to keep the Z to 7mm thick.
With V3, I changed the order of the color so the white is more visible.
StraberrySmall_V3.STL /StraberriesSmallv3.gcode :
- 1st layer: Green
- 2nd layer: red
- 3rd layer: white
- 4th layer: black
If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!