Fuji GW690III L-plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
-- Dec 18 update -- Version 2 has 2.5mm deeper hole for the socket screw. It was a bit shallow in first version.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
-- Dec 18 update --
Version 2 has 2.5mm deeper hole for the socket screw. It was a bit shallow in first version. If you have a long camera tripod socket screw, use version 1.
Can open film door and change film just fine. Just flip the notch back after you open the door.
PLA plastic is pretty stong but brittle. It does not bend, it snaps when it breaks. Therefore, do not apply pressure to the camera when composing. I strongly recommend using a geared head, like the BENRO GD3WH, where no force is applied to the camera and plate.
Under no circumstance do I take responsibility for damage on the item, if it breaks during use or if anything else breaks because of item failure.
It works well, but be careful when using it.
Print instructions
Category: 3D Printing Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Yes
Supports: Yes
Resolution: 0.2
Infill: 20% Cubic
Filament: Carbon Fiber PETG