Elegoo Saturn 4 Ultra Drip Bib
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drip bib for Saturn 4 Ultra. Clips on to resin vat pegs for easy drip catching and cleaning.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Resin Bib for Elegoo Saturn 4 Ultra
A low-profile resin bib that clips directly onto the Saturn 4 Ultra's existing VAT screws (see preview images) No tools or extra hardware needed.
Easy to print - no supports required. It will catch resin drips before they reach the screen tilt mechanism from the from front and sides. (Note that this model will not protect the back edge, which is generally less at risk). Captured drips can be returned to the vat, and the flat profile makes for compact, easy storage.
Two variants included
Full single piece for print beds that can accommodate the 337mm width
Split two-part version for smaller beds; superglue with standard CA glue. Use a flat surface and straight edge as an alignment jig while the glue sets.
I've been running this bib as a daily driver for several months — a solid upgrade over the stock Elegoo bib, which is bulky and doesn't store well.