1 / 7
Ford Focus RS mk3 Air Scoop Snorkel Remix — zdjęcie 1
1 / 7

Ford Focus RS mk3 Air Scoop Snorkel Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ford Focus RS mk3 Intake Snorkel

Ocena
0 / 5
Polubienia
11
Pobrania
159
Wydruki
0
Wyświetlenia
654
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I printed  The_Lambassador's ST snorkel only to find out it doesn't fit my focus rs mk3. I shortened the intake section by 15mm and designed a new scoop. I also added 15mm to the rear section to make sure scoop looks parallel to the grill mesh. 

Due to trim line difference, there is a slight overgap between the front and rear sections. I used a dremel to round off the internal trim. Not necessary but good to smooth out the excess line. Also use RTV or UV glue to glue pieces together after assembly.

Print with supports. I printed it with Creality PETG.