1 / 4
Waffle  Hearts  - Sensory Preschool toy for Playdoh — zdjęcie 1
1 / 4

Waffle Hearts - Sensory Preschool toy for Playdoh

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sensory-toy waffle press made for children's play dough, kinetic sand or soft clay

Ocena
0 / 5
Polubienia
17
Pobrania
28
Wydruki
0
Wyświetlenia
213
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Here's an easy to print play-dough toy waffle maker press that makes heart shaped waffles.  These play waffles are suitable for use in the toy waffle iron that you can find elsewhere on printables.  Children love pushing down on the top with all of their weight to get the small ball of play clay or play dough to spread out and fill the waffle cavity.  What comes out is a heart shaped play waffle.  Make these out of kid safe play dough that you can make at home, or you can purchase in different colors in the store.  I made this for the preschool and the kids love it.

Printing it:  No supports required.  There are two projects - these are prusa slicer projects - open them in prusa slicer with "file/open-project".  If you do that the deboss that is on the top and bottom of the print is automatically generated and the color changes make the model look fun to play with.  The first project prints the top and bottom waffle press piece.  The second project prints the hinge pin and the hinge retainer clips. 

To assemble, you might need to use a nail file to smooth out the edges of the hinge pin.  If it doesn't slip into the holes in the hinge, file it so that there is no elephants foot on the bottom edge where it is flat.  Also touch up the round edges so they are smoother and the pin will push readily into the hinge slots.  To align the hinges for the pin, just put the top and bottom parts together so the waffle press sides are facing each other.  Then press the hinge pin in from one end and line up the retainer slots in the two openings between the hinges. 

Once those are aligned, take the retainer clips and one at a time press it, open slot end first, into the hinge opening.  It will snap onto the hinge pin.  Once they are both snapped in place, gently open the waffle press slowly, and this will align the hinge clips and they will fully snap into place.  After that the hinged opening is easy to open and close and should not be stiff.  

All of the parts are optimized so you do not need support.  to make it machine washable, print it at .2mm layer height in PETG.  This will allow it to be placed fully assembled, open like a book, into your dish washer top tray for cleaning.

Tagi