Prince Ashitaka from Princess Mononoke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge of Prince Ashitaka riding his red elk
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Project: Prince Ashitaka.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
#000000 PLA Geeetech Black Transmission Distance: 0.1
#005133 PLA+ Esun Pine Green Transmission Distance: 1.2
#57361c PLA Overture Chocolate Transmission Distance: 0.2
#7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#b00f1e PLA Sunlu Matte Cherry Red Transmission Distance: 2.2
#ffb73e PLA Snapmaker Yellow Transmission Distance: 5.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 9 unique filaments
Swap Instructions:
Start with Marine Blue
At layer #18 (0.84mm) swap to Black
At layer #24 (1.08mm) swap to Pine Green
At layer #25 (1.12mm) swap to Black
At layer #28 (1.24mm) swap to Chocolate
At layer #30 (1.32mm) swap to Dark Brown
At layer #32 (1.4mm) swap to Scarlet Red
At layer #35 (1.52mm) swap to Cherry Red
At layer #39 (1.68mm) swap to Yellow
At layer #44 (1.88mm) swap to Jade White for the rest.