Mini Home Server Case for Micro-ATX / ASUS P5KPL-CM (Ender 3 Printable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable mini server case designed for the ASUS P5KPL-CM motherboard. The modular design fits an Ender 3 print volum
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 735
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3D printable case designed for a small home server build based on the ASUS P5KPL-CM motherboard. The main goal of this project was to create a fully printable enclosure that fits within the build volume of an Ender 3 printer, while still supporting a standard desktop motherboard.
Because of the limited print volume, the case is divided into several parts that are assembled using special joiner connectors and clue. These connectors align the panels and make the structure rigid after assembly.
The design was used for a Home Assistant server running on Ubuntu, but it can be used for many other home server projects.
Features
Designed to fit ASUS P5KPL-CM
May also fit other Micro-ATX motherboards with similar mounting hole layout
Fully printable on an Ender 3 sized printer
Modular design – printed parts are assembled with joiner connectors
Uses a PicoPSU DC-ATX power supply
Compact layout suitable for a home server or lab setup
Optimized for low-power hardware
Hardware Used in My Build
Motherboard: ASUS P5KPL-CM
CPU: Intel Core 2 Duo E5200
RAM: 2 GB DDR2
Storage: SATA HDD / SSD
Power supply: PicoPSU DC-ATX
Power adapter: 19V laptop adapter
Printing
All parts are designed to fit inside the build volume of an Ender 3.
Recommended settings:
Layer height: 0.2 mm
Infill: 20–30%
Supports: No
Material: PLA or PETG
After printing, the parts are connected using the joiner pieces included in the model.
Assembly
Print all case panels and joiners.
Clue joiners to connect panels.
Mount the motherboard using standard motherboard screws.
Install the PicoPSU power module.
Connect storage and wiring.
Close the case.
Notes
The case was specifically designed for ASUS P5KPL-CM, but other Micro-ATX boards with a similar mounting layout may also fit.
Some minor modifications may be required depending on your motherboard ports and cooling setup.
Cooling depends on your hardware configuration — consider adding additional ventilation if using higher power CPUs.
Use Case
This case was created for a DIY home server running Home Assistant, but it can be used for:
Home server
NAS
Router / firewall
Smart home hub
Retro PC build
Homelab experiments