Mercusys Wi-Fi cube wall mount and cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for the basic cheap Mercusys Halo mesh Wi-Fi cube. With an optional cover for hiding the white body.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I wanted to hide a Mercusys cube outside. The white body shines too much and is too obvious. Also existing mounts didn't look good enough for me. So I made:
A wall mount. for indoor you can print it in a white PLA to blend with the mesh Wi-Fi cube, outside would PETG be better.
An optional cover which slides over the cube and hides it. It covers the status LED, but you can see it shine through the bottom vents if needed. Print this upside down.
I have Mercusys Halo H60X, but any similar looking Mercusys cube will be compatible.