Anchor for SKLZ Batting Tee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anchor for SKLZ Batting Tee This is a replacement anchor piece for a SKLZ batting tee, which holds the pole against…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Anchor for SKLZ Batting Tee
This is a replacement anchor piece for a SKLZ batting tee, which holds the pole against the plate. The first time I printed it flat against the build plate, but it broke after taking a couple of hits. The layers will separate as the pole tries to pull the bolt out. My second attempt was printed vertically, on it's side, and it has held up much better.
The bolt head is 10 mm across, and the hole is 8 mm diameter.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
50%
Filament: iPrint 3D PETG Black
Notes:
User a higher infill and print vertically on its side for strength.
Category: Sport & Outdoors