Removable Clamp for DIN-Rail (Hutschiene)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to put a plate with some electronics in a elecvtric cabinet on a DIN-rail. So I created this.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 297
- Wydruki
- 2
- Wyświetlenia
- 750
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to put a plate with some electronics in a elecvtric cabinet on a DIN-rail. So I created this. I designed two types, quite similar, one with longer length of lower tooth (type "A") the other with less lower tooth (type "B").
For secure mounting I put two A#s left and right and a "B"-type clamp in the middle. I just glued the assembly plate on the three clamps. Easy removable.
First time I created something inTinkerCad with the (new) Sketch-Tool. Amazing, what you can create with it. Comes now close to Fusion in some regard.
Printed in PETG for some more flexibility.
Explore my other Printables: https://www.printables.com/de/@Tritschi