K1 SE Enclosure Lid Ventilated Side Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1 SE Enclosure Lid Ventilated Side Panels
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
K1 SE Enclosure Ventilated Side Panels
After purchasing the enclosure for the K1 SE, I noticed that installing the full kit caused the internal temperature to rise too much. This frequently led to heat creep and nozzle clogging, especially during longer prints.
To solve this, I designed ventilated replacement side panels for the enclosure lid. These panels add airflow openings while keeping the structure of the enclosure intact.
The idea is simple: you can print these parts and replace the original solid side panels of the lid.
Installation is very straightforward:
Remove the screws from the original side panels
Take out the stock parts
Install the printed panels
Reuse the same screws and mounting holes
No modifications to the enclosure are required.
This allows some heat to escape while still keeping the enclosure mostly closed, helping maintain a more stable printing environment without overheating the extruder and avoiding heat creep.
If you are experiencing clogging or excessive heat buildup inside the enclosure, these ventilated panels may help improve airflow.