Dust cover and Vacuum connector for Ryobi mini cut-off tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prototype of dust cover for Ryobi cut-off tool, allows connecting vacuum and some range of depth adjustment.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is prototype version that I'm still testing.
Prototype printed in clear PETG.
It does not account for embossed letters on the existing shroud -- I simply removed mine with milling machine.
Installed instead of adjustable rail. Existing screw can be re-used.
Dedicated screw can be used as well. Screw knob required heating of the screw to fit (melted plastic).
Load pipe and shroud as single model and print as a whole or print separately and glue
When adjusting for lesser depth of cut, uncovered holes appear, although they are closer to the axle, so should theoretically let less dust out.
Range of adjustment is 12 mm, from about 15 mm to about 3 mm depth of cut.
Has cut line indication in front and back, made bigger than in my printed version.
Using with steel cut-of disk would definitely melt the plastic
UPD
Used it for cutting drywall and it's really good. There is too much vacuum when in contact with the wall, no dust coming out. And when just plunging in, it does a good job of catching most of dust too.
TODO
When using on a flat surface, it's too airtight, so maybe some unclosed holes should have been left on the back side. For now solved with drilling two 6 mm holes there.
Plastic cover is more spacious that metal cover, creating step that can accumulate dust with one of rotation directions. Should probably align with stock metal cover to minimize dust accumulation
UPD
Printed new version in PC-ABS (black), used XY expansion of 99.5% but still needed to file some material away.
Shroud now has locator hole for the pipe part.
Pipe part no has built-in support.
Intended to be printed separately and glued together.
M5 knob is now smaller to minimize view obstruction.
Added vents to prevent air tight seal and allow vacuum to move some air.
Added M5 threads to shroud for placing bolt when no on the tool.