Makita LS1013 Dust Collection box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Behind the fence dust collection box to try to get more out of the dust collection capabilities of my miter saw.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
UPDATED
This is the v2 of my dust collection for a Makita LS1013 miter saw. The previous version had you cut the kerf in the lid and the base was carpet-tapped to the saw.
This version is screwed to the saw and has a kerf already in the lid as well as a better connection for 2.5inch hoses.
I found that with use, the collector would work loose from the saw and if it shifted, the saw could hit the uncut part of the lid and...it wasn't good.
Print settings:
PETG, needs supoorts, 0.6mm nozzle, 0.3mm layer, 3 walls, 5 top and bottom layers, 0.42mm z-height offset and tree supports makes them pretty easy to remove - this is very strong
This is my attempt at creating better dust collection for my miter saw. It The connection is 2 inches which isn't ideal but it is all that would fit in the space available. It is meant to be attached to the semi-circular casting behind the fence of the miter saw using double-stick tape. Once that is on, you glue on the lid. I included guide-pins to make that easier. Once it is all together you make a cut in the lid. Be careful with this as it could rip the whole thing apart.
I haven't used this very much yet but it should work pretty well. Once I've done some testing I'll post updates.