Slay the Spire Enemy Health Tracker

I didn't like any of the health trackers I found online so I designed my own. I wanted it to look nice when the slot is empty and I also wanted the cube slots to line up with the indicators on the actual card. This also eliminated the need to have numbers printed in the slots. If you print the color version, the red will flow from the card to the tracker creating an immersive look as well. I also added a defeated slot to the top of the track and the cube slots have a fillet as well which allows the cube to sort of be rolled up and down without having to actually lift it up completely.

I designed them to be 3 wide for a few reasons. The main reason is that they are able to fit in the box with no lid lift. There are only two enemies that spawn more than 2 minions, both in act 1. If you want to add the 4th slot, there is also a single enemy version.

I've included a basic version for single color printing. You can add in color swaps at 0.6mm layer height and 1.20mm layer height (start with white > then to red > then to black) to get a decent approximation to the full color model with little to no wasted filament.

Features:

• Fits sleeved cards

• Cube Slots line up with the card (when using sleeves)

• Defeated indicator slot

• Filleted cube slots allow tracker to be 'rolled' instead of being picked up and placed

• Trackers will fit in the collector's edition box with no lid lift*
  *I'm not sure if the retail box version has the same dimensions as the collector's edition box

Print Settings:

• Wall Generator: Arachne

• Layer Height: .20mm

• If printing the non-color version and would like some colors in the recesses: Layer swaps at 3 (0.6mm layer height) and 6 (1.20mm layer height) - Start with white, then red, then black.