Easter Eggs #3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are 5 new Easter egg designs that can be used for Easter decorations or for anything else with egg shapes.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These egg designs are similar to the last couple of years but changed a little bit.
These eggs can be printed in spiral vase mode or normal with 0 top layers, 4 bottom layers, 1 wall. In normal mode you can use infill and print the eggs solid if you want. I printed in vase mode. Each egg file is solid and approximately 50mm wide and 70mm tall. The use of a brim or raft will be helpful to get the egg to stick to the bed. I used support and a raft of 5mm to get the egg to stick to the bed. The eggs have a steep angle at the top and bottom to print; so I will suggest to print slowly to try to avoid holes and stringing.