1 / 12
ODrive motor holder for KEDA 63-64 motor and LPD3806 encoder — zdjęcie 1
1 / 12

ODrive motor holder for KEDA 63-64 motor and LPD3806 encoder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box for connecting motor and encoder, derived in spirit from https://www.thingiverse.com/thing:3167864 Features:…

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
336
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Box for connecting motor and encoder, derived in spirit from https://www.thingiverse.com/thing:3167864

Features:

  • Assembled exclusively using #6 sheet metal screws
  • Front plate oriented such that motor wires can come out more easily
  • Attempts to use the encoder's bearing to support the free end of the motor
  • Back encoder support is flexible in angle (but stiff in lateral translation and torsion) to accommodate alignment of motor with encoder
  • Back plate has enlarged screw holes for adjustment to be coaxial with motor
  • There is a feature to potentially add a finger-shield in the future (not yet designed) because there appears to be a pinch hazard between the motor body and the box

Notes:

  • The intent is to attach the motor to the larger system solely through the front plate. (Front plate would be modified to include mechanism to attach to larger system.) The box is not intended to be structural apart from holding the encoder.
  • Intended for use with ODrive https://odriverobotics.com/
  • One of the design goals was to make a compact system. This box is 2mm wider than the outer diameter of the motor, and the axial gap between encoder and motor is 5mm, so it's pretty compact compared to the minimum possible size.

Category: Robotics

Tagi