Planet Tantrax - A 2-dimension puzzle played on 3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solve by moving and rotating the tiles so that all paths on each tile connected to others of the same color.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Welcome to Planet Tantrax.
Legend says that Planet Tantrax was inhabited by fourteen tribes, all of them descendants either from the Tantrix (also called hexies) or the Trax (squares), who peacefully mingled, cooperated and prospered, building roads that connected all tribes through a wonderful road system. Each road was shaped as a loop, and since each loop was painted in a single color, it was easy for all to move around at will, bringing commerce and prosperity to all, knowing that going back home was simple.
Tantrax prospered for centuries, thriving on free transit and free commerce, until one of the tribe chiefs, a corrupt robber and war monger, closed the roads between tribes, extorted money from merchants, and used lies and envy to seed distrust and war between the tribes. Soon, the roads became chaotic and disconnected, bringing misery and suffering all over the planet.
Luckily, you can bring peace and prosperity back, restoring all roads back to single-color loops. It’ won't be easy, but the Tantrax tribes count on you!
THE PUZZLE
You manipulate 14 tiles that show paths in three colors, on top of a geometric solid (the planet). Your challenge is to move and orient the tiles so that all paths connect to others of the same color . When you are done, there should be at least one loop of each color on the planet.
The puzzle makes it easy to manipulate the tiles by using strong magnets that keep the tiles on the surface of the planet (more properly a “truncated hexahedron”); and allow them to rotate easily while staying in the same location.
The puzzle is a ton of fun to solve, and you will discover there is a logical approach to it (hopefully before you get too frustrated). Once you assemble it, just rotating some or all of the tiles creates a version of the puzzle that is easier to solve.
Also, the included custom-fit case makes Planet Tantrax a great present for your puzzle-nerd friends, as well as a beautiful display piece; just assemble the puzzle and use the box as a pedestal.
Three possible challenges to solve:
Separate all pieces from the planet before starting (HARD)
After solving, leave all pieces in place and just rotate them (EASY)
There are only 5 distinct solutions. Can you find them all? (HARDEST)
PRINTING
Prints best with PLA
The print uses four colors. Assuming you have an AMS, the objects in each plate are already preassigned to each of the four AMS slots: slots 1-3 for the paths, and slot 4 for the base color of tiles and planet. Jst load the four AMS slots with filament of the desired colors, and print. Which particular colors you use doesn’t matter (my friends keep requesting beautiful color combinations); color slots come pre-assigned to each piece.


If you want to print without an AMS (i.e., single color printer), print the colored paths and case letters separately by color (the color numbers on each piece will help you), and then glue them on the tiles. It won’t be as simple as using an AMS, but it can be done. Message me if you need help.
The print uses supports only for a very small circular magnet plug on the bottom of the planet. It is easy to remove from the plate, and imperfections on the resulting surface are irrelevant to the assembly.
Before printing, assign a single filament color in your AMS to each group of objects sharing the same color number (See the Object list in Studio or whichever slicer you use)

Do not move pieces around on the plate, or the paths and their grooves on the underside of the tiles will come misaligned, ruining your print.
SUPPLIES
You will need 8x3 mm cylindrical magnets, 14 for the planet and 14 for the tiles. Any generic brand will work, as long as they measure 8x3 (Don’t use smaller ones, or the tiles will not stay attached to the planet when you rotate them around, and rotating the tiles in place is important to the puzzle). You can get 300 such magnets for around 15 dollars on Amazon or elsewhere.
Superglue for attaching the circular covers on the magnet wells, such as this one (any gel superglue will work)
A pointy hobby knife for removing the plug from the bottom of the planet
Not mandatory but recommended: two “magnet pens” of which there are many available on Printables, MW and Thingiverse. I used these ones.

ASSEMBLY
After printing, use the hobby knife to remove the bottom plug created by the Support directive. When removing it, don’t overwork it, don’t go too deep; the plug is easy to remove if you advance slowly, but PLA is soft and if you push too hard you may push through the thin walls..

Insert the 8x3 magnets on both the planet and the tiles. Magnets were chosen large enough to hold the pieces on location while moving the planet on your hand or rotating individual tiles.


VERY IMPORTANT: Magnets must be inserted in the same orientation on the 14 planet holes , and the oppositeorientation on the tile holes. It's best to use two “magnet pens”, one holding the magnets in opposite direction vs. the other pen, to avoid gluing a magnet on the wrong orientation (Ungluing a magnet to turn it around will usually force a new print of that piece)
Cover the magnets with the circular covers you printed, using superglue to hold the covers in place (the magnets are strong, if you don’t glue the covers the pull from the other opposite magnet will pull them out)


Use the opposite polarity (the other magnet pen) to insert magnets on the tiles. Then close them as the previous ones with a circular cover each.

When done, test that all tiles are strongly attracted to the planet, stay centered on each location, and rotate freely.

THE CASE
The case keeps the planet and tiles together. The two case hemispheres are joined via a short piece of filament, about 34 mm long.
The space allowed for inserting the filament is quite over-dimensioned (2.2 mm diameter to hold filament that should be 1.75 mm thick). However, printer calibration and filament uneven thickness may conspire to make the fit too tight for you to slide the filament in. If that is the case, do not force the filament in, because the hinge walls are necessarily thin, and PLA is not the strongest of plastics. Instead, lightly sand the filament, mostly to remove any superficial imperfections, and lubricate it with a drop of oil. It should slide in perfectly fine.
