1 / 5
Vorwerk Thermomix TM21 Locking Lever — zdjęcie 1
1 / 5

Vorwerk Thermomix TM21 Locking Lever

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement part for your broken locking lever

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is the locking lever and safety switch for a Vorwerk Thermomix TM21 a few things you should know if yours broke is that there are 4 small tabs on the metal bar inside of the locking lever when you get your broken lever off (i melted mine with a torch) you need to file them down to fit my part on, don't forget to use manual supports so there wont be any supports in the hole

unfortunately i didn't take a picture of it on the metal bar with my part on i needed to assemble it to make sure it all fits, your version doesn't get a heart on it, that's only for my sweet mom

my part is press fit it should be very tight 

i printed it with a .4mm nozzle and abs with 100% infill

Tagi