Modular Silicone Mold Box (75x75x110mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Silicone Mold Box (75x75x110mm)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview This is a sturdy, interlocking mold housing designed for silicone casting. With an internal footprint of 75x75mm and a maximum height of 110mm, it provides a reliable and leak-resistant frame for your DIY molding projects.
Key Features:
Adjustable Height: The model is 110mm tall, but you can easily adjust the height in your slicer to fit your specific master model, saving both time and filament.
Interlocking Walls: The sliding joint system ensures the walls stay perfectly vertical and won't bulge under the weight of the silicone.
Easy Separation: Once your mold has cured, the panels slide apart effortlessly, making demolding a breeze.
Reusable & Sustainable: Stop wasting foam board and hot glue; this is a permanent addition to your workshop.
Recommended Print Settings:
Material: PETG or ABS (for better chemical resistance and durability).
Wall Count: 3+ for strength in the joints.
Infill: 15-20% (Gyroid or Grid).
Scaling: Keep X and Y at 100% to maintain the fit; only adjust Z if you need a shorter version.