Cookie/Treat Heat Sealer Table - 3.375 inch tall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A foldable table to make using an impulse heat sealer more easy and consistent.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Eadubs great model was oh so close, but not the right geometry for my impulse heat sealer.
I used tinkercad to make my modifications and I am not yet up to speed with a CAD program to use the STEP file yet.
- 3-3/8th inch tall (86 mm)
- angle of attachment is 40 degrees
- setback from the angle attachment on the heat sealer end to the leg is 1-5/16th (33mm)
-the dropped angle was too long and hit the sealer base that is at a different angle… so I removed it/not needed.
On my posted make, was printed using Creality K2 plus. I colored the groves alternating to aid in visual placement of the plastic bag. The original have the groves every 1/4", thus the white or orange lines are 1" apart.
I added a picture of the heat sealer (model FS-200) - no brand name, purchased at Amazon if I remember correctly. If you have the same one - your set to go!