Wyoming satellite speaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wyoming Satellite Speaker Case for Raspberry Pi Zero 2 W + ReSpeaker 2 Mic HAT
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wyoming Satellite Speaker Case for Raspberry Pi Zero 2 W + ReSpeaker 2 Mic HAT
This is a compact and elegant enclosure designed for building a Wyoming satellite voice assistant for Home Assistant.
The case is designed to house a Raspberry Pi Zero 2 W with the ReSpeaker 2-Mic HAT, creating a small standalone satellite compatible with the Wyoming Protocol.
The enclosure focuses on good airflow, easy maintenance, and a clean appearance, making it suitable for placement anywhere in the home.
Features
🔊 Designed for voice assistant satellites
Optimized internal space for a Raspberry Pi Zero 2 W and ReSpeaker 2-Mic HAT setup.
🧲 Magnetic front and rear panels
Both the front and back lids are held in place with 6×3 mm round magnets, allowing quick access to the speaker or Raspberry Pi without screws.
🌬 Good ventilation
The case includes plenty of ventilation to keep the Raspberry Pi cool during continuous operation.
🧵 Fabric-friendly design
The outer design allows the case to be wrapped in speaker fabric for a cleaner and more elegant look that blends well with home decor.
🔧 Easy maintenance and upgrades
Magnetic lids allow quick access to:
the speaker
the Raspberry Pi
wiring and connectors
📦 Compact footprint
Small enough to place on a desk, shelf, or wall-mounted location as a dedicated voice satellite.
Hardware Used
Raspberry Pi Zero 2 W
ReSpeaker 2-Mic HAT
Small speaker (size depending on your build)
6×3 mm round magnets (for front and back lids)
Assembly
Insert the magnets into the front and rear lid slots (ensure correct polarity).
Mount the speaker in the front section.
Install the Raspberry Pi Zero 2 W with the ReSpeaker 2-Mic HAT.
Route power and speaker wires.
Snap on the magnetic lids.
Optional: wrap the exterior with speaker fabric for a cleaner aesthetic.
Ideal For
Home Assistant Wyoming satellite setups
DIY local voice assistants
Smart home enthusiasts who want privacy-focused voice control
Notes
Magnets are 6 mm diameter × 3 mm height.
Some light glue may help secure magnets if your printer tolerances are loose.
Fabric wrapping is optional but recommended for the best look.
If you build one, I’d love to see your make! 🙂