Mini-nuc bee hive feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the replacement of the original mini-nic feeder, just with half of capacity, so you can extend space for frames.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
This mini-nuc hive feeder is intended to be used as a replacement of the original one.
This replacement occupies only the one slot frame space instead of two slots.
It could be useful when you need to expand space for bees as the expense of feeder.
The target mini-nuc is the cheap Chinese version from Temu etc.
It is possible to print it without supports.
My model was printed using PETG, 0.2 mm.
You may need to make it waterproof by epoxy etc.
Changing print settings may help:
- increase Fill density
- increase Infill overlap
- increase Perimeters
- lowered Speed
- Seam position = Random
Post hints, if you have!