Integrated ExpressLRS Antennamount-Bumper for the TBS SourceOneV3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In the front and rear bumper of the TBS SourceOneV3 integrated antenna mount for the Happymodel EP1 ExpressLRS antenna.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is a combination of the front and rear bumper for the TBS SourceOne V3 integrated with my antenna mount design for the Happymodel ExpressLRS ep1 antenna.
This design is also a remix of the TBS Source One Accessories but this is not available on this platform here, so I was not able to tag it as a remix source.
Update(2022-03-09): It works great but I noticed that with 6 mm the holes were too big for the standard 5 mm standoffs. I changed the design and uploaded two versions with 5 mm holes on top (stayed with 6 mm on the bottom for the screw heads).