Feller-compatible Cover Plate – Type 13 Switch + Socket (CH)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feller-compatible 3D-printed cover plate for Type 13 switch + socket combo (T13). Snap-fits without a screw.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the excellent Swiss Light Switch with Socket by plaasmachientjie cover plate adapted to fit the Feller Standard Type 13 combination (switch + socket T13): Feller 920-87060.POMI.61.
The original model targets the T12 variant (Feller 920-82060.POMI.61). This remix adjusts the geometry to accommodate the T13 socket opening layout.
Snap-fit Design (no screw needed!)
One happy accident of this remix: the cover plate clips securely onto the Feller frame without requiring a screw. The tabs around the switch opening are tight enough to hold the plate firmly in place by friction/snap-fit alone. The screw hole is still there if you prefer a more permanent installation, but you can totally skip it — handy if you've lost the original screw!
Status & Roadmap:
📌 Note on V2: A more dimensionally accurate version (V2) of this remix exists, based on another model. However, its license does not permit remixing or redistribution. I have contacted the original author to request permission — if granted, I will publish V2 here. Stay tuned!
Print & Material Notes:
I printed this in FlameGuard ASA 275 Polar White, which is rated UL94 V0 (self-extinguishing). For anything mounted near electrical components, I strongly recommend using a fire-rated filament. Standard PLA or PETG are not recommended for this application.
In order to have the best surface possible on the T13 outlet part, I've printed it vertically with tree supports on the build plate.
⚠ Disclaimer: This model is intended for use as a decorative/replacement cover plate only. Installation near or around electrical components carries inherent risks. Always ensure your installation complies with local electrical codes. The author assumes no responsibility for any damage or injury resulting from the use of this print. When in doubt, consult a licensed electrician.
No affiliation with Feller AG:
This model is not affiliated with or endorsed by Feller AG. "Feller" is used solely to indicate compatibility with their standard switch/socket frames.