Caddx Walksnail Ascent Lite VTX Mounting Pod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All in one swappable pod for the Ascent Lite VTX
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I have a small form factor version as well. Get it here.
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance.
Screw VTX to the Body with 4* M3x4 or M3x6 screws.
The Cam-Holder screws to the Body with 4* M3 screws.
Glue the Slider to the bottom of the Body. If you do not need the swapping ability you can leave the Slider off and screw Body directly to vehicle.
Mount the Vehicle Fixture to the plane, truck or whatever using zip-ties or glue. I added a wing profile option to make the Vehicle Fixture fit on the top of a wing better. Just glue the two together.
Slide Pod onto the Vehicle Fixture and secure with a M2*4 screw.