SV08 MONOLITH GANTRY 9MM BELTS 2WD EXPERIMENTAL - UPDATED 5/30
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for 9mm belts and 2WD. few files may be oversize, please scale down in slicer to 1/10th should still be dimensionaly ok
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
update 6/1/2026 -
the more rigid ab mounts seemed to have resolved the x beam racking, however...
unfortunately when i had first caded this up, i made some of the holes on the o.g motor and front mounts a little oversized. initially this was to account for bolt misalignment or if i later decided to switch to m5 bolts. little did i know at the time this may of not been the best idea as i was expecting everything to stay rigid like on the stock sv08 gantry once bolted down.
if like me you are using m4 bolts straight through on the rest of the joints, you may experience some actual flex in the motor mounts and fronts- as mentioned earlier in my prior updates, this becomes more of a problem once you start getting into higher belt tensions as it very slightly twists the gantry inwards enough to cause racking. the gantry should feel very rigid, square and move smooth before being mounted on the z mounts and belted up. most deracking should be done on the rear joints like on every voron deracking instructional video once the gantry is in the frame.
if you have already printed the gantry, for time bieng, i recomend rotating the extrusions and mounting everything as per monolith gantry cad bom using proper slide in style tnuts that dont fall out and stay in place with no play ( i dont feel regular tnuts will cut it) and ideally switching to m5 bolts (this will mean tapping out the holes slightly with a 5mm drill bit). bolts can be mounted from the top and from underneath z mounts this way without heat inserts or nuts. you are still free to mount which ever way you want so long as its rigid and/ or you dont plan to print as fast as i do.
in the meantime as im still waiting for my t-nuts to arrive, and bieng impatient as i am, i I will be redesigning and reuploading a new version very soon, that hopefully should be more rigid and aligned with the official monolith design to simplify things and prevent future issues.
update 5/29/06
- New experimental ab xy mounts, - much more rigid, square gantry & less racking!
The Voron monolith gantry uses m5 t-nuts top and bottom which I suspect would be a lot more rigid than the standard sv08 bolts going from top to bottom. however due to the limitations with the sv08 extrusion design, m4 bolt holes as well as my 3m thick ti backers, i have redesigned the mounts for a more snug fit, extra rigidity & better alignment along the y axis to help with racking, which becomes a problem especially at the higher belt tensions needed for this setup.


Also for those who don't want to use the printed spacer, that goes between the non dehubded and dehubbed toothed pulleys (which I also don't recommend, it breaks easy and not worth the headache)
I recommend using the spring and metal spacer setup from the sheet metal version.
my gantry felt a lot smoother after swapping to these.
refer to 3rd pic for specs. these go on the shaft between the pulley and bearing, i have the spring compressed in between as you can see in pics below:



if pics are not helpful, hop on the monolith discord and use the search function, you'll get there...
update 5/19/2026
new z mounts - tight m4 slots underneath

the m4 nuts floating inside my old slotted z mounts rounded the plastic resulting in the m4 bolt getting stuck, had to get the bolt cutters out to remove the bolt, and cut the old z mount off with a saw.
these new z mounts are designed to have the m4 nuts press fit into the bottom, may need clamp or vice to push in initially as tight fit, but stay in place well and hopefully lead to less plastic rounding and stuck bolt threads.
much better if you need to constantly and easily removed the gantry, without resorting to heat inserts.
for time being I have printed these in recycled abs with 101% shrinkage and 65c chamber temps. please tune according to your specific filament and conditions for dimensional accuracy and layer adhesion.
I have also ran into some issues with the printed pulley spacers constantly breaking and causing belt rub and some inconsistent results. So as per monolith discord sheet metal bom, I have ordered some aliexpress 0.5, 10mm length, 6mm outer diameter steel springs to go in place of the printed pulley spacer. these slide over the live shafts and between the toothed pulleys, which hopefully should be a much more reliable solution.
another issue i had , seems common in monolith discord too, is the grub screws on the xy and rear motor mount front pulleys rubbing on the belts. these must be no longer than 2.5mm, however these can be difficult to source. I just went to town on mine with a grinder, and initially wrongly thought they would be fine at 2.8 to 3mm, which still caused belt rub. so please ensure your grub screws are less than 2.5mm and nicely tightened in. im hesitant to use loctite at this stage, but feel free to do so once everything is aligned and moving well.
for future plans, once i get some more time and before my next reprint in pccf, pps or better, will be updating few gantry bits with increased rigidity and better clearance in mind, so stay tuned and any feedback is welcome.
update 4/1/2/2026 - Redid the z mounts in a lower profile, still very rigid, can be mounted in many different orientations to suit your bed/toolhead setup

30/3/2026 - Again today hastily retightened belts but still not properly as I will be reprinting the clickchanger carriage belt mounts more secure. decided to test moving it on the screen at 1200mms 30k accells, seems promising with no slipping I can see or hear so far. I am running ldo super power ht s55 at 24v with tmc5160 and have done zero config tweaking as of yet.
One issue so far is my clickchanger nozzle not reaching bed, as I have already raised my r3men bed with some aluminum spacers, I am currently printing smaller form z mounts which like the old z mounts can be mounted top or bottom side of the gantry. will be uploading on here for others who run into similar toolhead height issues. Ultimately the goal of mine would be to atleast have some build volume gain instead of loss.
29/3/2026 noticed some of the stl models may be oversized, just uniform scale down to 10% in slicer as the units in my fusion may have been off by one zero at the time. i will try to resize them as i go but for now this should be fine.
UPDATE 28/3/2026 : I have mounted the gantry in the printer and so far there seems to be no aparent alignment issues with regards to holes and spacing. Also little to no racking despite belt tension bieng uneven and not properly tightened, i cant say why, but so far may just credit this to the great design of the monolith gantry and how much more rigid it feels.
I have left out one inner corner bolts on the motor/double sheer mounts as I didn't check properly check the monolith assembly, and apparently these were meant to be shorter bolts, aprox 6mm, and my long m3s were rubbing on the belts, so be aware if you run into this too. I didn't want to pull apart the gantry again and left these for when I reprint the gantry in higher temp filament.
on my old stock 9mm gantry I had alot of belt walk, which i suspected was from the old poorly designed tensioners which had a tendency to be off-tilt. moving it by hand, the monolith gantry seems to have reduced this and the belts seem alot more centred on the pulley, I have only placed all the recommended 0.5mm shims in between bearings and pulleys as per the monolith cad files and have not done any further shimming or adjustment, so far so so good. i am however using some beaten up powge epdm belts which I don't think are straight cut and from what I have read this is also to be expected to some degree unless one forks out for closed loop belts, so long as no rubbing on pulley flanges.
Pretty exhausted but I will make further adjustment in the next few days and report back, hopefully a video of it up and printing.

! PLEASE NOTE - BETA TESTER !
untested - waiting on bearings to arrive before chucking in the printer, and thought I would upload early for more experienced cad and gantry assembly users to freely review, test and refine as necessary.
will be uploading the fusion file shortly, so please forgive they may be a little noob and messy, next iteration i will try clean things up.
if you download for later please check back here regularly for any updates as I will be deleting, reuploading parts with corrections and cleaning things up as I go, also please feel free to leave a comment or feedback if there is anyway I can improve this.
you can also find the stock sv08 cad files from the sovol github and line everything up accordingly.
some parts will need to be flipped and inverted in the slicer so please double check all orientations before printing. and if you are not good with cad, you can use negative parts feature in the slicer to add or remove extrusion slots or holes as necessary, I take no responsibility for your wasted filament so please look over everything properly before hitting print.
there is about 1-2 cm potential loss in y travel compared to stock monolith due to belt clip getting in the way.
motors will have to be mounted in the same orientation as stock sv08 otherwise will hit z tensioner up top
I have made my best attempt to align it to use stock sv08 extrusion holes. if you have any issues, or if like me, you are using voron gantry backers, the extrusions can also be rotated and with lots of m3, couple of m4 t-nuts and shorter m4 bolts can be used for mounting instead everything instead. depending on your extrusion orientation holes may need to be drilled for extra bolts on the sides for added rigidity.
the ab xy slide mounts are not the best design for printing but I had to slim down the end mounting point in such a way to clear my clickchanger shuttle (although may work better for other non standard toolheads with similar clearance issues too).
the ab mounts I printed using regular supports. please ensure you have your printer well tuned and support settings down pat. ideally if you have a toolchanger use a interface layer for a cleaner finish.
z mounts printed fine for me with no supports, otherwise a pain to remove so avoid if you can.
the motor mounts and front mounts shouldnt need much if any supports either, maybe just for the holes.
has holes for heat inserts, but for quicker re-assembly and testing I have added slots everywhere for m3 and m4 nuts to use in place. if aligns well, heat inserts still recommended for extra rigidity alignment and to prevent racking, otherwise if you crafty enough you can use negative parts and modifiers in slicer to carefully resize and adjust holes accordingly.
not sure if stock sv08 m4 bolts will be long enough so please double check models and what you have on hand. You may need to order extra long m4 bolts for z mounts, and while at it you will likely need extra long m3 for mounting motors and double sheer plate.
look up monolith gantry GitHub and gantry configurator for BOM and all the extra bits you will need.
print settings
Printed in recyled abs, I used 8 walls, 8 top, 8 bottom, 40% infill
credit to
CloakedWayne
for bringing the monolith gantry
and other users on here for sparking my interest in undertaking this little project.
