8-Fold Planter Pot: vase mode + self watering
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This pot can be printed FAST with integrated drain holes, looks good, and has held up to years of semi-outdoor use.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a planter pot that looks good, fits on my printer bed, and suits my IKEA pot stand. This design uses vase mode, a 0.8mm nozzle, and a 1.6mm line width to make a pot that is fast to print but tough.
The drain holes are part of the design, and work by having such a shallow angle that subsequent layers leave a gap for water to exit. The shallow pocketed sectors around the pot ensure that some water is retained for self-watering purposes.
I originally made these pots in 2023, and they're still working well for me.
Recommended Settings:
PETG or other tough material. (PLA not recommended as it becomes brittle over time)
0.8mm nozzle, 1.6mm line width. (A smaller nozzle can still go wide, you might need to do some tests)
Fuzzy Skin. (Gives a nice texture and helps hide imperfection)
0.4mm layer height. (Prints faster, helps ensure the drain holes work)
Enough bottom layers for at least 1mm of base thickness.