Stealth Press 1S – Arm for MGN9H
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed arm for Stealth Press 1S to support an MGN9H carriage instead of the original MGN12H. Tested with a 315 mm MGN9
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Stealth Press 1S – Arm for MGN9H Rail
This is a remix of the arm part for the Stealth Press 1S heat set insert tool.
The original design is made for an MGN12H carriage and rail. Since I had an MGN9H carriage with a 315 mm rail available, I modified the arm so it can be used with the MGN9 system.
The arm geometry was adjusted to fit the MGN9H carriage while keeping the original mounting hole pattern designed for the MGN12 rail.
Because MGN9 and MGN12 rails have slightly different hole offsets, only three mounting holes align with the MGN9 rail. In practice this still provides sufficient rigidity for my setup.
Tested configuration:
Rail: MGN9 – 315 mm
Carriage: MGN9H
Only the arm part is modified. All other parts should be used from the original Stealth Press 1S model.
If this remix helps you, feel free to share a make.