1 / 5
PIR housing — zdjęcie 1
1 / 5

PIR housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two pieces PIR housing. Fits to the corner. Designed for 25mm rounded PIR.

Ocena
0 / 5
Polubienia
5
Pobrania
4
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

My very first model of PIR motion sensor housing. Designed to fits to the wall corner.

Print:

No supports needed, only brim. Tested with PLA with 15% infill.

Usage:

Drill holes for screws and enjoy. You can put wires by default back hole or use a space inside to connect a wire from the wall / ceiling.

Tagi