1 / 6
K1C Chain Riser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed this after upgrading the extruder on my K1C to the DXC, which rised the chain by about 15mm and kept poppoing out every print before installing these pieces.
Use a soldering iron to insert the threaded inserts into the parts.
BOM:
(2) M3x16 Bolts → Back_ChainRiser
(2) M3 Washers → Back_ChainRiser
(2) M3x4 Bolts → Bottom_ChainRiser & Top_ChainRiser
(2) M3x4x5 Threaded Insert → Bottom_ChainRiser & Top_ChainRiser
Versions:
Initial, adjusted only holes for bolts instead of countersunk screws.
Removed side material to be able to remove front head cover to swap nozzle without having to remove the whole thing.