Egg Lamp for RGBW Puck Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Egg Lamp for RGBW Puck Light
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Decorative egg lamp designed specifically for the RGBW puck light LED lamp.
The egg acts as a diffuser and creates a soft glow that works well as a night light or Easter decoration.
With the remote control you can easily switch between 16 colors and light modes, turning the egg into a warm ambient lamp or a colorful decorative light.
Features
Designed for RGBW puck light
Soft egg-shaped diffuser
Works as night light or decoration
Color changing with the puck light remote
Clean and simple print
Printing
The model is split into two parts:
Plate 1: the egg diffuser
Plate 2: the puck light holder
For the example shown here, the egg was printed in white PLA for good light diffusion and the holder in black PLA, but any color combination will work.
No AMS is required, since the parts are printed separately.
Supports
The holder prints without supports.
The egg requires a small tree support inside to support the top of the egg.
This single internal support is easy to remove after printing.
Suggested settings
Layer height: 0.2 mm
Print time (approx.)
Egg: ~50 minutes
Holder: ~40 minutes