Small Sensory Doughnut Shaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small fidgety shaker ring, easy to print!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy to print! no suports needed! Printet in pla at 0,2 layer height .
Finer layer height gives smoother feel.
Filling the Doughnut:
Make an pause around 15mm print height for the Smaller Doughnut or 17mm print height for the Bigger Bagel.
Its important to make the pause a high as possible (so shaker matrial doesn't get blown out), while the top dosent get too narrow for filling.
Shaker matrial:
You can really use whatever that makes a nice shaker sound, short grain rice, print leftovers, small beads, etc.
While print is paused:
Fill carefully, and don't overfill, for a nice shaker, left over space is needed.
Spread evenly, to avoid high spots, printer fan may blow out material if overfilled.
Enjoy your satisfying Doughnut Shaker!
Safety note
These prints aren’t certified toys, so supervision matters. Avoid sharp edges and small parts, and clean prints with warm water and dish soap (no dishwasher).