1 / 1
Housing for ESP32 WLED controller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for ESP32 WLED controller
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 2579
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (45)Powiązane
This housing is designed for the ESP32 WLED Controller: https://github.com/Hasenpups/WLED_ESP32_Controller
The housing is minimal and only requires 2 M3 screws.
Big thank you goes to the designer of https://www.thingiverse.com/thing:5282811