Ender 3 S1 Plus with sonic pad, stability brace All Printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable brace Z axis stability rods. In need of options. No adjustment needed.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Needed? Not really.
looks cool? YES!
I wanted an option that was connected to the front corners.
Print all files in original position.
Inner rod must be turned 45 degrees on plate or use auto. Be aware of the fitment direction. It's marked with IN - UP
Outer Rod cover does not need support.
M3 nuts and 12mm screws for rod assembly.
M5 bolts for top brackets and 2020 Hammer T nut. Use the one for OEM screen.
The bolts in front corners will fit on the top bracket. I just used a M5 nut and filed down one side of the one fitted at the edge. Made room for it in the model.
For the (optional edge) bolt you need a 10 mm M5 and a Hammer T nut.
You will need new longer M5 bolts in the front.
Pictures might vary from actual print as I'm constantly updating design. The front bracket has been made larger than the pictures.