Sonoff S26 v2.6 Tasmotizer jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many jigs exist for the Sonoff S26. I could not find one that fitted the new PCB layout as in version 2.6. For…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Many jigs exist for the Sonoff S26. I could not find one that fitted the new PCB layout as in version 2.6. For convenient tasmotizing and backup I constructed this jig. Use long pogo pins. Glue them into the "top" and next glue the bottom and top together. The edge of the PCB fits exactly the jig. I reflashed two "new" Sonoffs S26, alignment was perfect.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament: Herz PLA doesn't matter
Notes:
Use epoxy to glue the pogo pins to the top frame. Increase holes in bottom frame if necessary, so that pogo pins move freely. Finally glue top/bottom together with any glue you use for PLA.
Category: Electronics