Air Assist NEJE A40640 - 1/8" BSP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from https://www.thingiverse.com/thing:5144951 Big thanks to peppesci for sharing his awesome designing and…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed from https://www.thingiverse.com/thing:5144951
Big thanks to peppesci for sharing his awesome designing and for having shared the original step file.
It allows to add a male 1/8" BSP air connector.
Internal airflow were enlarged to offer less resistance to my diaphragm pump and preserve it.
1/8" BSP connector can be screwed directly.
As for the original,i would recommand to use rubber ring for sealing the laser.
I only used a very thin one around the lens and the sealing is perfect.
Airflow with my DongYang 80L/min pump is just awesome !
I also have official Neje's air assist i can plug on my workshop compressor, using it at 1.5 bars/20 PSI but i find this one more efficient.
Compared to the Neje's needle kit, this air assist don't leave directional traces of smoke and you don't have to orient anything.
Print Settings
Printer:
Anycubic Mega
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
35%
Filament:
Prinsfil PLA
Black Mat
Category: Parts