1 / 2
2011 Ford Ranger radio bezel phone mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Follows the contour of the bezel, can be mounted along the top. Uses Nite Ize Steelie Orbiter as the base ecosystem.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Run a strip of VHB or command strip horizontally across the backside and mount where desired.
I printed in "Pale Pink Elixer" PLA as a test and it's been going strong for a year. If you live in a hot place, Id recommend a better plastic for heat resistance.