1 / 5
Zenze Bronica ETRS ETRSi Base with Dark Slide Holder — zdjęcie 1
1 / 5

Zenze Bronica ETRS ETRSi Base with Dark Slide Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The base for ETRS for protection and better grip, now even hold your dark slide.

Ocena
0 / 5
Polubienia
3
Pobrania
31
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

This model is a based on my last model https://www.printables.com/model/1627309-zenze-bronica-etrs-etrsi-base

Please be aware the fit for dark slide is VERY TIGHT, please use the provided onshape or step file to adjust the gap for snug fit but not stuck.

The defualt gap for dark slide is 53.1mm x 0.36mm, adjust based on your printer, material and print profile.

It's the base for Zenza bronica ETRS / ETRSi (idk if ETR works) with two C shape clip to grip on the camera.
The base cover the metal bottom plate, some holes for speed grip and battery compartment.

Print Profile:

  • 3 Wall loops

  • Fuzzy skin for bottom of the base only, not on the rail

  • Matte filament should increase grip, but fuzzy skin is great already.

 

BOM:

  • (2x) 4.2mm OD x 3mm M3 heat insert

  • (2x) 3mm M3 screw (I used flat top, try use the low profile screw you got)

 

CAD is also avaible on Onshape
https://cad.onshape.com/documents/2170d68f64975700b190821a/w/3794d0ae21904c8c3cc137a6/e/8aaa271f248c00f38cee252d?renderMode=0&uiState=69aa7314ab3c36c987d19084

Tagi