Belt Clip 1.3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An improvement to my previously-released belt clip.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 57
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated to Version 1.3: After using the belt clips for awhile, I found out that PETG can deform much as PLA does. As a result it became easier for the belt clip to come off unexpectedly. I added a ridge to the back plate to help hold it on, then with this version, the ridge is a bit larger. Let me know what you think!
I have a belt that has a bit of excess length - it's part of its design. However, that length stops just short of one of the pants loops. To fix that, I designed this clip.
As mentioned in the print instructions, I'd recommend printing in PETG since PLA tends to permanently deform under pressure, especially with warmth (such as body heat). If you're using the STL file, I'd recommend printing with at least 5 walls for strength.
Please post makes!