1 / 5

The Low Hardware Caliburn v1.1 (LHC)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Isaacdaparrot

@Isakdaparrot_1908660

A Caliburn that uses lesser hardware

Ocena: 0 / 5
Polubienia: 25
Pobrania: 29
Wydruki: 0
Wyświetlenia: 658
Oceny: 0

Aktualizacja u źródła: 13 mar 2026

Informacje o modelu

Źródło: Printables
Kategoria: Outdoor Toys
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (49)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)

Do you know of the LHTCUBLT2? This version really just changes the blaster to accept full length darts and half length darts with the adapter! However, the imperial version has little to no performance boosts, the metric version on the other hand has an improved plunger system capable of a strong air seal!

For my Talon mag Adapter I used a Iron nail custom cut to size to work as a pin, the files do include a 3d printed pin to work with though

You will want to print the priming bars and U channels at 100% infill for strength and rigidity of a C4

The Metric version plunger parts are optimized for a 36MM OD 30MM ID O-ring, I will work on releasing more versions of the plunger system for a wider audience

EVERY PART IN THE SMALL FORMAT PRINTER FILE MUST BE GLUED TOGETHER WHEN ASSEMBLING AS THEY ARE STRUCTURAL PARTS. TRY PRINTING THE PARTS FROM THE LARGE FORMAT PRINTER FILE WHEN POSSIBLE

Plunger tube for metric is 40MM OD 36MM ID PVC Pipe with a length of 187MM

For imperial plunger tube a regular Caliburn plunger tube should work

Reddit: u/Such-Ad-7107

Printed on Ender 3 max neo

Assembly manual may be found at

under downloads

Changelog

v1.1
Added picatinny option for muzzle
Added printability for smaller printers 220mmx220mm

The attachments I used

Foregrip https://www.thingiverse.com/thing:2901423

Iron Sights (I cant find the link, but it is Caliburn iron sights by captain slug)

Scar