Longer Nano Ruby Blank Positioning Plate Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a blank base model to use for positioning jigs or whatever use you can think of.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a blank base model to use for positioning jigs or whatever use you can think of. One version has the 80x80mm laser area raised up by .1mm in the middle, the other is flat on top.
It fits snugly in the space the metal positioning plate fits, and is a good base to use for any positioning jigs for repetetive laser marking. I needed to make a jig to mark two small metal sliding tins at a time (a total of 50) and this made it easy to have consistently placed results.
For that jig I included extensions that were the right focus height so I could lower the laser shield to sit on top of them for super quick focusing. That's the image I included, I haven't printed a blank yet since it's not super useeful for much unless you lost your original metal plate. The jig in the photos i printed with an 0.8mm nozzle and 0.56mm layers since it's just a jig and i'm impatient.
I included a bunch of different file formats and the original fusion file with a sketch in it so you can modify this to suit your needs.
The original Plate is 4mm thick: 2.5mm for the top part and 1.5mm for the inset area. I increased the inset area to 2.5mm to make it more secure.