Mini Sidewinder X1 - 1:5 Scale model kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a fun 1/5 scale Artillery Sidewinder X1 model! Recreated in high detail using Fusion 360 and a Cura printer…
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 99
- Wydruki
- 2
- Wyświetlenia
- 773
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Here is a fun 1/5 scale Artillery Sidewinder X1 model! Recreated in high detail using Fusion 360 and a Cura printer mesh model as reference.
Would make a great Christmas tree ornament :)
Print Settings
Printer:
Artillery Sidewinder X1
Supports:
No
Resolution:
0.2mm
Filament:
Overture PLA
Matte Black
Notes:
Most parts can be printed without support and are already oriented in optimal printing orientation.
The build plate prints upside-down so the guide dots are printed below the plate to allow easy alignment on top of the printer chassis.The filament spool holder requires support and is printed on its side.
Post-Printing
Assemble per assembly instructions
I used Loctite cyanoacrylate super glue for all of the assembly.
I did not glue the mini-benchy to the build plate, and I will probably consider affixing a small square of magnetic tape so I can put different "mini prints" on it.
Category: 3D Printer Accessories