Star Wars Polan 717
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Polan 717 Jedi Shuttle from Star Wars: The Acolyte
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
The Polan 717 is the shuttle used by Jedi Master Sol in Star Wars: The Acolyte. It has a long range and can operate independently for long periods of time. It carries a small starfighter escape ship and has a detachable hyperdrive.
This model consists of two parts - the main section and the hyperdrive - that can be connected.
The prong at the front of the main part can extend and rectract.
The wingtips of the hyperdrive can fold in and out. The hyperdrive also has a bay that can hold the escape ship (link).
Also included is an articulated stand.
The model is at 1:270 scale.
Dimensions | Length | Width | Height |
|---|---|---|---|
All | 311mm | 223mm | 75mm |
Main | 219mm | 140mm | 67mm |
Hyperdrive | 136mm | 223mm | 75mm |
Print Instructions
The model is split into different pieces for different colors and easier printing.
All pieces and their recommended settings are listed below.
I've also added "Base"-versions of the main and hyperdrive, which include everything in one model. I do not recommond printing these.
Main
Part | Layer Height | Color | Supports | Notes |
|---|---|---|---|---|
polan-cockpit | 0.1mm | black | no | |
polan-main | 0.2mm | silver | yes, organic | |
polan-main markings | 0.15mm | red | yes | |
polan-prong | 0.15mm | red | yes | |
polan-top | 0.15mm | red | yes | |
polan-wings | 0.2mm | silver, red | yes | 2 copies start with silver swap to red at 25mm |
Hyperdrive
Part | Layer Height | Color | Supports | Notes |
|---|---|---|---|---|
polan-hyperdrive antenna | 0.15mm | silver | no | 2 copies |
polan-hyperdrive markings bot | 0.15mm | red | no | |
polan-hyperdrive markings top | 0.15mm | red | no | |
polan-hyperdrive | 0.2mm | silver | yes, organic | add "polan-hyperdrive support blocker" as a support blocker. use a brim |
polan-rudder | 0.2mm | red, silver | yes, organic | start with silver swap to red at 7.8mm swap to silver at 38.6mm |
Stand
Part | Layer Height | Color | Supports | Notes |
|---|---|---|---|---|
polan-stand base | 0.15mm | black, gold | no | start with black swap to gold at 2.9mm swap to black at 3.65mm |
polan-stand arm | 0.15mm | black | no | |
polan-stand hinge | 0.15mm | black | no |
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#